Electrical & Plumbing Forms

A mandatory post-completion certificate that every licensed plumber must issue to the property owner and lodge with the...

The Licensed Electrical Inspector (LEI) licence in Victoria authorises an A-grade electrician with extensive post-trade...

A Certificate of Electrical Safety (COES) is the Victorian compliance certificate required for all prescribed and most...

A Certificate of Compliance for Electrical Work (CCEW) is the NSW compliance certificate required for any electrical...

In Queensland an Electrical Safety Form 4 is the compliance certificate issued by the licensed electrician on...

Annual backflow test report submission — every registrable testable backflow device must be tested and the result...

Open Cabling Registration — required under the Telecommunications Act 1997 (Cth) and Cabling Provider Rules 2014 to...

Restricted Cabler Registration — limited scope under the ACMA Cabling Provider Rules. Covers cord and connector...

CEC / SAA Solar PV Designer accreditation — required to design any grid-connected solar PV system claiming Small-scale...

CEC / SAA Solar PV Installer accreditation — required to install or supervise installation of any grid-connected PV...

SAA Grid Connected Battery Systems (GCBS) accreditation — a full accreditation class (not an endorsement) issued by...

EV Charging Installer endorsement — required to install AC and DC EV supply equipment (EVSE) per AS/NZS 3000:2018...

Clean Energy Council (CEC) Installer Accreditation for grid-connect solar PV is the national scheme required for any...

CEC Designer accreditation (separate from Installer) authorises a person to design grid-connect solar PV systems —...

Battery Storage endorsement is added on top of the CEC Solar PV Installer or Designer accreditation and authorises the...

The Grid-Connect Inverter endorsement under the CEC scheme authorises connection of solar PV inverters to the...

CEC accreditation has separate endorsements for Stand-Alone Power Systems (SAPS / off-grid), small wind turbines and...

To work as an electrician on wind turbines or wind farms in Australia you first need a current state electrical licence...

ACMA Open Cabler Registration is the broadest tier of the federal cabling-registration scheme and authorises the holder...

Below the ACMA Open registration sit four narrower endorsements — Restricted (single jack-points only, no MDF), Lift...

You must hold an ACMA Open Cabler Registration before connecting any cable to the Telstra / NBN network — that includes...

A Restricted cabler registration covers single-customer / single-line residential work — basically a phone socket...

A Lift Cabler registration covers cabling installed inside a lift / elevator car and lift well — alarm phones,...

An Aerial Cabler registration covers external aerial / antenna cabling — TV antennas, satellite dishes, MATV head-ends,...

Structured Cabling Specialist is an endorsement on top of Open registration that covers high-bandwidth ethernet cabling...

Optical Fibre is an endorsement on top of Open registration that lets you splice and terminate single-mode and...

Coaxial Cable endorsement covers RG6 / RG11 / hardline coaxial used for MATV, HFC NBN, CCTV trunk runs and pay TV...

The mandatory licence required to perform electrical installation work in Western Australia, issued by the Electrical...

A licence issued under the Occupational Licensing Act 2005 (Tas) that authorises an individual to perform electrical...

A business-level registration or licence required before a company or sole trader can legally carry out electrical...

Victorian Class A unrestricted electrical licence (Electrician's licence — A Grade). Required to perform, supervise,...

NSW unrestricted electrical licence — administered by Building Commission NSW (apply via Service NSW). Two streams:...

Qld Electrical Work Licence under the Electrical Safety Act 2002, issued by the ESO. The standard electrician licence...

WA Electrician's Licence under the Electricity (Licensing) Regulations 1991. Worker tier (EW) and Contractor tier (EC)....

SA electrical licence under the Plumbers, Gas Fitters and Electricians Act 1995. CBS issues the contractor / worker...

Restricted Electrical Licence (REL) lets non-electrician trades (refrigeration mechanics, instrument fitters, lift...

Hazardous Area Electrician — IECEx personnel competence certification (CoPC) under IEC 60079 series. Required to...

The NSW Electrician Licence (commonly called the A-grade or unrestricted electrical licence) is issued by NSW Fair...

The Victorian A-grade Electrician's Licence is issued by Energy Safe Victoria (ESV) under the Electricity Safety Act...

The Queensland Electrical Work Licence (often referred to as the QLD A-grade equivalent) is issued by the Electrical...

The WA Electrical Worker's Licence (EW Licence) is issued by the Electrical Licensing Board and administered by the...

In South Australia electrician registration and plumbing, gas fitting and electrical (PGE) contractors licences are...

In Tasmania the Practitioner Licence — Electrician is issued by Consumer, Building and Occupational Services (CBOS)...

In the ACT the Electrical Licence is issued by Access Canberra under the Construction Occupations (Licensing) Act 2004...

In the Northern Territory the Electrical Licence is issued by the Electrical Safety Regulator within NT WorkSafe under...

A Disconnect / Reconnect Licence (DRL) is a restricted electrical licence held by non-electrician trades — most...

The Restricted Electrical Licence — Air-Conditioning class (commonly called ACEL) is issued by ESV in Victoria and...

A specialised restricted electrical licence endorsement for technicians installing, maintaining and commissioning...

Cable jointers terminate, joint and pull underground low-voltage and high-voltage power cables for the distribution...

Instrumentation electricians work on process-control systems — refineries, gas plants, water treatment, breweries,...

In-service testing and tagging of electrical equipment plus residual-current device (RCD) testing is required under...

High-voltage switching authorisation allows a person to operate switchgear above 1000 V AC — substations, ring main...

A specialty restricted electrical licence held by mechanical / mining / marine fitters and equipment maintenance...

A statutory pre-work (NSW) or post-completion registration (QLD) notice that every licensed plumber must lodge with the...

A mandatory post-installation certificate that every licensed gasfitter must issue to the property owner and lodge with...

Victorian Licensed Plumber registration — required to take responsibility for and certify plumbing work in Victoria....

NSW plumbing & drainage contractor licence — required to contract or sub-contract plumbing, draining, or gasfitting...

Qld Licensed Plumber / Drainer — issued by the QBCC under the Plumbing and Drainage Act 2018 (Qld). Licence types:...

WA plumbing contractor / tradesperson licence under the Plumbers Licensing and Plumbing Standards Regulations 2000....

Backflow Prevention endorsement on a plumbing licence — required to install, test, commission, and annually re-test...

Gasfitting Type A endorsement — covers internal cleaning, maintenance and adjusting of Type A gas appliances, including...

Gasfitting Type B endorsement — covers a single Type B appliance of energy input greater than 10 MJ/h and less than...

On-Site Wastewater Management endorsement on a plumbing licence — required to design, install, and commission septic...

Solar water heating installer endorsement — required to install, commission, and certify solar hot-water systems and...

Mechanical Services Plumbing endorsement — covers chilled water, condenser water, hydronic heating, steam, and process...

Fire Protection Plumbing endorsement — required to install, modify, and commission fire sprinkler, hydrant, and...

Roof Plumbing endorsement — covers metal roof and wall cladding, gutters, downpipes, rainwater tanks, and stormwater...

NSW plumbing licence with a Water Supply class endorsement — the trade authority required to install, alter, disconnect...

Victorian Licensed Plumber with a Water Supply class — issued by the Building and Plumbing Commission (BPC) under the...

Queensland Licensed Plumber with the Water Supply scope — issued by the QBCC under the Plumbing and Drainage Act 2018....

WA Plumbing Tradesperson Licence with the Water Supply scope — issued by the Plumbers Licensing Board (Building and...

Sanitary class endorsement — covers above-ground sanitary plumbing (toilets, basins, sinks, fixture pipework) installed...

Drainer / Drainage class — covers below-ground sanitary drainage from the property to the sewer or septic system per...

Roof Plumbing / Roofing class — covers metal roof cladding, flashings, box gutters, eaves gutters, downpipes and...

Fire Protection / Fire Services class — covers wet fire systems: sprinklers, hydrants, hose reels, booster connections...

Irrigation class — covers permanent irrigation systems connected to a drinking water supply or a rainwater / recycled /...

Backflow Prevention class — authority to install, commission and annually test testable backflow prevention devices...

Thermostatic Mixing Valve (TMV) Installer endorsement — authority to repair, alter, maintain and test TMVs in...

Gasfitter / Gas Plumbing endorsement covering LPG installations on Type A appliances per AS/NZS 5601.1 and AS/NZS...

NSW Sewer & Drainage Repair authority — combination of the NSW Fair Trading Drainage class plus Sydney Water Listed...

Type A gas appliance authorisation — covers residential and light commercial appliances (cooktops, ovens, water...

Type B gas appliance authorisation — covers commercial / industrial appliances (boilers, ovens, kilns, furnaces,...

Victorian Gasfitting Licence — issued by the Building and Plumbing Commission (BPC), which has replaced the VBA for...

LPG Installer authorisation — covers reticulation from LPG cylinders, tanks and underground vessels through to Type A...

ATCO / Utility-side gasfitter authorisation — required to work on the ATCO gas network upstream of the consumer meter...

South Australian Plumbers Licence — plumbing, gas fitting and electrical registration and contractor licensing is...

Tasmanian Plumbers Licence — issued by Consumer, Building and Occupational Services (CBOS) under the Occupational...

ACT Plumbers Licence — issued by Access Canberra under the Construction Occupations (Licensing) Act 2004. Separate...

Northern Territory Plumbers and Drainers Licence — issued by the NT Plumbers and Drainers Licensing Board under the...

Any premises that fills compressed gas cylinders (industrial, medical or specialty) above the manifest quantity is a...

Victoria's Dangerous Goods (Storage and Handling) Regulations require licensing of premises storing or filling...

Queensland's Work Health and Safety (Dangerous Goods) Regulation requires premises storing or filling compressed gas...

Hospital piped medical gas systems (oxygen, medical air, N2O, surgical air, medical vacuum) must be designed, installed...

Domestic LPG cylinders (9 kg BBQ, 45 kg patio heater / hot water) are not licensed at consumer level but state...

LPG installations in caravans, motorhomes, marine vessels and other mobile / floating dwellings must comply with AS/NZS...

A standard plumber's licence does not always cover septic / aerated wastewater installation — most states require an...

ARCtick Refrigerant Handling Licence — federal licence required to handle, install, service, or decommission any...

In NSW you need a licence or certificate to do air conditioning and refrigeration work — an individual or...

In Victoria, refrigeration work is regulated as a class of plumbing under the Plumbing Regulations 2018. A Refrigerated...

Western Australia does not currently issue a separate trade licence for refrigeration mechanics — the trade is...

A Refrigerant Trading Authorisation (RTA) is the federal business licence required for any individual or business...

In NSW, installing single-head split-system air conditioners requires both a NSW Electrical Tradesperson Certificate...

Working on commercial air-conditioning plant (multi-head VRF, ducted package units, chillers, cool rooms, supermarket...

UEE32225 Certificate III in Air Conditioning and Refrigeration (replacing the superseded UEE32220 from 24 March 2025)...

In South Australia, refrigeration work falls under the Plumbers, Gas Fitters and Electricians Act 1995 — administered...

In Tasmania, refrigeration / air-conditioning mechanics are regulated under the Occupational Licensing Act 2005...

In the ACT, refrigeration / air-conditioning work is regulated as a class of plumbing under the Construction...

In the Northern Territory, refrigeration mechanic work is regulated under the Plumbers and Drainers Licensing Act for...

The Restricted Refrigerant Handling Licence — Automotive Air Conditioning (Vehicle MAC) is the federal licence required...

A Trainee Refrigerant Handling Licence is the federal authorisation for an apprentice or trainee to handle refrigerant...

A refrigeration-stream restricted electrical licence allows a Cert III refrigeration mechanic to perform electrical...

Mechanical Services class — covers HVAC pipework: chilled water, condenser water, heating water and steam reticulation...